FS Epoxy Patch Repair Mortar Cold Cure is for repairs to damaged concrete at temperatures down to 3 degrees C

High strength 3 pack epoxy repair mortar

Cures down to 3 degrees C

Particularly useful for repairing floors in food production areas

Low odour, non taint formulation - can use in food environments

Good abrasion resistance

Good chemical resistance

5.5kg units will complete 0.55 square metres at 5mm thick, 11kg units will complete 1.1 square metres at 5mm thick

Size: 5.5kg or 11kg units

more features

Colour: Grey. Red, green and blue available at additional cost

Deeper repairs do not require priming but for repairs of less than 4mm thick prime first with FS Epoxy Primer

See data sheet for full instructions

Tip: Wipe trowel with FS Tool Cleaning Solvent when 'finishing' to ensure a smooth finish

You may also require:

FS Tool Cleaning Solvent

FS Epoxy Patch Repair Mortar - standard version

FS Epoxy Patch Repair Mortar Fast Cure - if speed of cure is important

FS Rapid Polymer Modified Patch Repair - for larger, deeper repairs